五工位機型均采用空壓離合剎車器，機器啟動電流小并能實現“寸動”，“單次行程” 及“連續行程”除“寸動"方式外，主滑臺在停車時自動停止在最后位置,以利于提供最大操作調整空間。

All multi-station models apply air clutch brake with smallstarting current, allowing operation modes of"Inching"," Single Stroke" and "Continuous Running" . The main 

sliding table can automatically stop at its rear position while operated under ” Single Stroke" and "Continuous Running" modes, so as to obtain maximum space for adjustment.

圓周式剪料機構可確保材料剪斷面整齊平整。

Enclosure cutting off die and knife deliver a clear and perfect cross section of blank for forming.

該減料機構可使剪料滾輪作用力的方向與剪刀桿中心一改,從而使剪切力在一條線上傳遞,可獲得較高的剪切效率及穩定性。

The cut off roller is designed at the center of the cut off rod to avoid eccentric force occurred on the roller pin, so as to obtain high efficincy and stability of the cutting mechanism.

與主滑臺退回動作同步的前通出( P.K.O)動作可使工件在成形后暫時停留在打模內，以免被沖具帶出。

Front knock-out(P.L.O)actions coincide with back action of main sliding table, allowing the forged parts temporarily stay in the forming die, instead of being taken away by the punch.

本臺、主滑臺、機械手機座等主要機件在鑄造后經過消除殘余應力處理，以防止變形并保持機器精度的長期穩定。

The machine main parts such as the bench, main sliding table etc ha been treated for removing the residue stress arter casting to avoid any deformation and keep stable precision of the machine in long term.

特點

1、機械手夾送料采用旋轉擺動方式，夾緊力采用氣動，不但穩定還可根據不同產品調整壓力避免夾傷產品。

Manipulator with rotary swing clip feed means and pneumatic force, is not only stable but also can adjust the pressure according to  different avoid crushing the products.

2、后頂出機構可單獨調整，且前死點位置不變。

The rear knock out mechanism can be individually adjusted with front dead point in the same position.

3、送料機構采用棘爪輪式送料，動作穩定可靠，而且調節十分方便。

Feed system of ratchet pawl wheel is stable, reliable and convenient to adjust.

4、驅動機械橫向運動由中間傳動軸上的雙凸輪實現，所以整機動作的協調性極易調節。

Cross movement of the machine driven by double-cam above the shaft makes it easy to adjust the operating compatibility of the machine.

5、以各部位凸輪經電腦計算設計并由數控機床加工制造，可保證曲線圓滑和準確。

The cams in various positions are calculated and designed by computer, and then machinedand manufactured by CNC machine tool to ensure smooth and precise curves.

6、側板采用經淬火處理的進口高碳耐磨合金鋼SKS，使主滑臺保持長期精度穩定性。

Side plates apply imported quenched high-carbon alloy steel SKS to maintain stable precision of main sliding table in long term.

7、配置PLC數控安全檢出裝置，可自動檢測機器主要機構工作狀態及故障顯示。

A PLC controlled safety checking system can automatically detect the pertormane of key system and display of any abnormality.

8、配置進口變頻器，可實現方便的機器生產速度無極調速。

Import inverter is equipped for easy  adjustment of stepless output speed.

9、可按用戶要求選擇配備“人機界面”的數控系統，可用于后通牙管定寸、擋料位置、送料長度的自動設定，大大縮短模具更換和調整時間，該系統可存儲99個規格的產品調整參數，適用于快速換模的要求。

As a optional, CNC system of “man-machine interface” can be equipped to automatically adjust the dimensun of rear knock-out threaded, stop position and feeding lenght,greatly saves mould renewal renewal and adjusting time. With a memory caoacity of 99 digital modules, it is suitable for fast change over of moulds.